Double Glazed Window Repair
Double glazing is an energy efficient investment that prevents loss of heat during winter and keeps your home cooler in the summer. The ability to have your double-glazed windows repaired when needed is a great way to ensure that they function properly.
Over time your double glazed windows can suffer from problems like condensation and misting. Double glazed windows may be difficult to open and close.
Broken Panes
A rogue ball or a flying stone from your lawnmowers or an intense storm could shatter your double-pane windows, leaving you home vulnerable to the elements. Although a window that is cracked can be difficult to repair but you don't need to have it replaced entirely. The insulated glass between two glass panes is still in good shape, so you can repair your double-paned window yourself.
First, you'll need to take any broken glass from the frame. This is a messy job and you'll need to be cautious to prevent any glass fragments from falling onto the floor or falling out of the frame. Wear work gloves to protect your hands and use an abrasive cloth around the damaged glass to avoid any further injury or cuts. After removing the broken glass, clean the frame of the window thoroughly to remove any sealant or other debris. Sand rough areas of the window frame to create a smooth surface on which to install your new glazing.
After cleaning the frame, you can apply another layer of glass to the seam where you removed the broken pane. This is the best method to seal and protect your window. It will also save you energy costs by preventing drafts and water from entering the home. The next step is to choose the right glazing material. There are several options available, including clear tape, which is a bit more robust than regular tape and will keep your window from further cracking, as well as glazing film that resembles clear plastic wrap. The benefit of this option is that it can be painted to match your existing frame and will also keep snow and rain out too.
Regardless of the material you pick regardless of the material you choose, it is essential to press the glazier's points into the place where the putty joins the frame. These will keep the glass in place, and will help it stick to the frame. You can find glazier's points in hardware stores, and they are available in pre-made ropes which you roll onto the frame rabbets.
Condensation
If you're experiencing problems with condensation, it is recommended to contact the window manufacturer. There are warranties and guarantees that cover these problems. Fogging or condensation on the panes of your windows is a sign that your seals are damaged. Only a professional can fix this problem by replacing the panes.
It's a difficult procedure that requires specialized tools to remove and replace the old window. A professional can complete this task and supply the tools. Making use of these tools can be risky it is recommended to leave this kind of job to an expert.
Wear safety glasses and gloves if you decide to do it yourself. You may be exposed to flying glass fragments. It is important to remove any putty or metal glazing points from the grooves that will receive the new window. Wire-brushing the frame, vacuuming or wiping with a damp cloth is recommended. When the frame is dry and clean, you will need to get a replacement glass that is 1/8 inch shorter in each direction than the existing window and test-fit it in the grooves.
Depending on your frames depending on your frames, you'll need to apply a layer of silicone caulk to the grooves in order to ensure that the new pane is secure in the right place. After the caulk is dry, you will need to smooth it out and make any needed adjustments. Then the wood molding can be put back in place.
If the weather suddenly changes, double-glazed windows may become difficult to open or close. Extreme temperatures can cause the frames to shrink or expand and cause them to slide or become stuck. Try wiping the frames with water and lubricating them when this happens however it is better to seek advice from the company who installed your windows.
Misunderstood
Misted Double Glazing is a window issue that develops when moisture gets trapped between the glass panes of double glazed windows. Hertford double glazing repair glazing is made up of two panes that are separated by a gap filled with argon to improve thermal efficiency. This creates an airtight seal that keeps warm air inside and cold outdoor air outside, allowing you to keep your temperature at a comfortable level in your home.
The seal may fail over time, and moisture can build up between the glass panes and cause them to become to appear misty. This happens because the space between the panes is heated by the sun, which causes water vapour to develop within it.
This is a normal thing to happen but if it happens between the window panes it could cause problems as it will no longer be able to control the temperature in the room and allow the outside temperature to influence the indoor temperature. If you notice that your double-glazed windows have become misty, call in the experts at Northfield Glass to investigate.
We can replace a single sealed unit, without needing to replace the entire window. This is far more streamlined than a total replacement. Our misty glass repair involves taking off and cleaning the unit of glass before replacing it with a brand new one. This will create an airtight seal again.
Some companies in the industry claim that they can inject chemicals through holes into windows with mist to remove the condensation and fog. We do not recommend using this method. This is not just unsightly, but it could also damage the toughened glass and result in a window that does not completely perform its function.
If you don't address the issue immediately, it could lead to mold, which could not only harm the window, but also risk health issues for your family members. Moisture in the window can also lead to other problems in your home like damp or rot. In some cases, the window may need to be completely replaced.
Failed or Blown
Double-glazed windows consist of two glass panes with an air or inert between them. This increases their thermal efficiency, allowing heat in and cold out. As time passes the gas will be depressurized and cause many problems.
Condensation between panes is among the most frequent. While it is a natural event, it doesn't necessarily mean that your window has failed but it could be an indication that you need to seal your windows. Condensation can be an indication that your double glazing is damaged in which case it's time to get it replaced completely.
Double-glazed windows can also cause draughts. This could be caused by the seal being damaged or a damaged handle or lock. A draught can be obvious and result in higher heating costs It is therefore essential that you get this fixed sooner rather than later. You can test the seals by rubbing around the edges of your window frame to see if you feel any cold air.
There will also be water beads on the interior of windows if the window seals are failing. This is an indication that you need to replace the seals on your double-glazed windows.
Your window frames have been designed to move a bit, which is necessary to keep the glass sheets in position. Over time, this special packaging material can be compressed. This could cause the seal to become broken. This will allow air to circulate between the panes, and decrease the energy efficiency of your window.
Double glazing that has broken a seal is a sign of failure and should be fixed immediately. A blown seal will stop your double glazing from fulfilling its primary function which is to keep the cold out and warm air in. A damaged seal could let moisture into your home, which can cause mold and other unpleasant conditions. Call a double glazing specialist as soon you notice a blowing window seal. They can replace the entire unit.